Perfactory® 3 DDP

EnvisionTEC’s Perfactory® DDP 3D Printer is a low cost, easy maintenance and user friendly 3D Rapid Prototype Manufacturing System. Using state of the art Digital Light Processing® (DLP) technology from Texas Instruments®, the Perfactory System produces the finest detail in the shortest period of time to create 3D models that range from the conceptual to the fully functional.

Benefits:

• Build speed in constant through the build up to 1” (25 mm) at 0.0039” (100 µm) voxel thickness
• Economic material use with no vat
• Very few moving parts and minimal consumable components make the system user serviceable
• Quick and easy 3D printer material changeover

• Clear Guide – Surgical Drill Guide
• E-Denstone – Dental Models
• E-Dent – Temporaries
• E-Partial – Partials
• E-Shell® 200 – General
• Press-E-Cast – Waxups*

• Lens system: Lens f = 2.36″ (60 mm)
• Build envelope: 3.31″ x 2.48″ x 9.06″ (84 x 63 x 230 mm)
• Native Voxel Size: 0.0024″ (60 µm)
• ERM Voxel Size: 0.0012″ (30 µm)
• Dynamic Voxel Thickness Z**:  0.0006” (15 µm) to 0.0006” (150 µm)

*Specifications subject to change without notice.
**Material dependent

• Footprint (L x W x H): 29” x 19” x 53” (73 x 48 x 135 cm)
• Weight: 188 lbs (85 kg)
• Electrical Requirements: 100-120V, 5.4 Amps or 220-240V, 2.4 Amps
• Data Handling: STL
• Warranty: 1 year

• Utilizing a built in Ethernet interface, the Perfactory can easily connect directly to a PC workstation or be integrated into a network. The Perfactory has an embedded PC, allowing the system to work independently from the pre-processing workstation. The machine can be remotely monitored from any computer on the network using the communication software from the Perfactory Software Suite. Any STL data format can be easily converted into voxel matrices using the Perfactory® Software Suite and then imported into the Perfactory® System to be built.