Perfactory® 4 Standard XL in Puerto RIco

Perfactory

Perfactory® 4 Standard XL

EnvisionTEC’s Perfactory® 4 Standard XL 3D Printer with ERM is a low cost, easy maintenance and user friendly 3D Printer. Using state-of-the-art Direct Light Projection technology from Texas Instruments®, the Perfactory® 4 Standard XL 3D Printer produces the finest detail in the shortest period of time. It creates 3D models that range from the conceptual to the fully functional.

Benefits:

  • Build speed is constant through the build up to 1” (25 mm) at 0.0039” (100 µm) voxel thickness
  • Economic material use with no vat
  • Very few moving parts and minimal consumable components make the system user serviceable
  • Models are suitable for direct manufacturing through rapid casting
  • A choice of high quality materials are readily available
  • 3D printer material changeover can be done quickly and easily

Materials Available

  • ABStuff – General purpose similar to ABS plastic
  • AB-flex – General purpose similar to ABS plastic with flexible characteristics
  • HTM Series – High temperature molding, architectural models, plating
  • LS600, EC100, WIC 100 G, E-Shell® 200 Series – General purpose
  • PIC 100 – Casting
  • R5, R5 Gray, R11 – General purpose, master models
  • RC31 – High temperature applications

Machine Specifications*

  • Build Envelope: 7.6” x 4.7” x 9.06” (192 x 120 x 230 mm)
  • Projector Resolution: 1920 x 1200 pixels
  • Native Pixel Size: 0.0039” (100 µm)
  • Pixel Size With ERM: 0.0020” (50 µm)
  • Dynamic Voxel Resolution in Z**: 0.0010” (25 µm) to 0.0059” (150 µm)

*Specifications subject to change without notice.
**Material dependent

System Properties

  • Footprint (L x W x H): 29” x 19” x 53” (73 x 48 x 135 cm)
  • Weight: 188 lbs (85 kg)
  • Electrical Requirements: 100-120V, 5.4 Amps or 220-240V, 2.4 Amps
  • Data Handling: STL
  • Warranty: 1 year

System Data Handling

  • Utilizing a built in Ethernet interface, the Perfactory® 4 Standard XL with ERM System can connect directly to a PC workstation or be integrated into a network. The Perfactory® 4 Standard XL with ERM System has an embedded PC, which allows the system to work independently from the pre-processing workstation. The Perfactory® 4 Standard XL with ERM System can be remotely monitored from any computer on the network using the communication software that is integrated into the Perfactory® Software Suite. Any STL data format can easily be converted into voxel data using the Perfactory® Software Suite and then imported into the Perfactory® 4 Standard XL with ERM System to be built.

call-today