Perfactory® Apollo in Puerto RIco

apollo3-555x1024

Perfactory® Apollo

The Apollo is the new desktop 3D detailed small piece printer with an enlarged build envelope for small pieces with an unbeatable price to performance ratio. The Apollo is the perfect choice for the small to medium sized company looking to fulfill their 3D printing production requirements. With the ability to run unattended, 24 hour production is achievable. The Apollo can run a variety of 3D printing materials for direct casting, hot rubber, and silicone molding. There are no limits to geometric complexity as long as the item has been designed in a 3D CAD program and may be exported as an STL file. The 3D printer machines are delivered and installed with all the relevant software to enable automatic support generation and perfect model production. Resolution and surface finish remains constant over the entire build area due to patented technology based on voxelisation.

Benefits:

  • Easy handling through pre-adjusted material modules
  • Build speed is constant through the build up to 0.12″ (3mm) to 0.28″ (7mm) per hour at 0.0014″ (35 μm) Z-voxel thickness (material dependent)
  • Very few moving parts and minimal consumable components guarantee a strong and reliable system
  • Utilizing a built in ethernet interface, can connect directly to a PC workstation or be integrated into a network
  • Changeover between 3D printer materials is done quickly and easily

Materials Available

  • R5, R5 Gray, R11 – Cold silicone molding with high resolution
  • PIC 100, PIC 100G – Direct casting
  • WIC 100G – Direct Casting
  • EC500 – Direct Casting
  • RCP30, RC31, RC70, RC90, Photosilver – HTV Molding
  • HTM140 – HTV Molding with minimal post finishing
  • EPIC – Direct Casting

Machine Specifications*

  • Build Envelope: 3.94″ x 2.95″ x 3.94″ (100 x 75 x 100 mm)
  • Projector Resolution: 1400 x 1050 pixels
  • Native Pixel Size: 0.0028″ (71 µm)
  • Dynamic Voxel Resolution in Z**: 0.001″  0.0059” (25 µm x 150 µm)

*Specifications subject to change without notice.

**Material dependent

System Properties

  • Footprint (L x W x H): 21.65″ x 17.72″ x 35.03″ (55 x 45 x 89 cm)
  • Weight: 77.16 lb (35 kg)
  • Electrical Requirements: 100-120V, 2 Amps or 220-240V, 1 Amp
  • Data Handling – STL
  • Warranty – 1 year

System Data Handling

  • Utilizing a built in Ethernet interface, the Apollo can easily connect directly to a PC workstation or be integrated into a network.  The Apollo has an embedded PC, allowing the system to work independently from the pre-processing workstation.  The machine can be remotely monitored from any computer on the network using the communication software from the Apollo Software Suite.  Any STL data format can be easily imported using the Apollo Software Suite.

EnvisionTEC 3D Industrial Printers Printers Spec Sheet Available through Rich Port 3D Solutions

call-today