Perfactory® 4 Mini in Puerto RIco

Perfactory

Perfactory® 4 Mini

EnvisionTEC’s Perfactory® 4 Mini 3D Printer with ERM is a low cost, easy maintenance and user friendly 3D rapid prototype manufacturing system. Using state-of-the-art Direct Light Projection technology from Texas Instruments®, the Perfactory® 4 Mini 3D printer produces the finest detail in the shortest period of time. It creates 3D models that range from the conceptual to the fully functional.

Benefits:

  • Build speed in constant through the build up to 1” (25 mm) at 0.0039” (100 µm) voxel thickness
  • Economic material use with no vat
  • Very few moving parts and minimal consumable components make the system user serviceable
  • Changeover between 3D materials is quick and easy

Materials Available

  • ABStuff – General purpose similar to ABS plastic
  • ABflex, ABS Flex, Superflex (Requires factory fitted UV Option to use these materials) – General purpose similar to ABS plastic with flexible characteristics
  • EC500 – Casting
  • HTM Series – High temperature molding, architectural models, plating
  • LS600, WIC100G, WIC300, E-Shell® 200 – General purpose
  • Photosilver – High temperature applications with fine detail
  • PIC 100, EPIC – Casting
  • R5, R5 Gray, R11 – General purpose, master models
  • RCP30, RC31, RC70, RC90 – High temperature applications

Machine Specifications*

  • Choice of 2 lens sizes: 60 mm or 75 mm
  • Build envelope, native voxel size and ERM voxel size dependent on lens and model chosen. Please see data sheet for more details.
  • Projector Resolution: 1920 x 1200 pixels
  • Dynamic Voxel Resolution in Z** 0.0006” (15 µm) to 0.006” (150 µm)

*Specifications subject to change without notice.
**Material dependent

System Properties

  • Footprint (L x W x H): 29” x 19” x 53” (73 x 48 x 135 cm)
  • Weight: 188 lbs (85 kg)
  • Electrical Requirements: 100-120V, 5.4 Amps or 220-240V, 2.4 Amps
  • Data Handling: STL
  • Warranty: 1 year

System Data Handling

  • Utilizing a built in Ethernet interface, the Perfactory® 4 Mini with ERM System can connect directly to a PC workstation or be integrated into a network. The Perfactory® 4 Mini with ERM System has an embedded PC, which allows the system to work independently from the pre-processing workstation. The Perfactory® 4 Mini with ERM System can be remotely monitored from any computer on the network using the communication software that is integrated into the Perfactory® Software Suite. Any STL data format can easily be converted into voxel data using the Perfactory® Software Suite and then imported into the Perfactory® 4 Mini with ERM System to be built.